The use and maintenance of diesel tiller

I. Precautions before and during the use of tiller

A. Before using the tiller, please run-in for more than 12 hours at the throttle, let the engine and chassis run-in oil (precipitation can be added into the chassis), clean the oil filter, and add a clean CD-class 40# diesel engine Use the oil again.

B. In the early stage of use, the tiller should not be overloaded. It should be done for more than 48 hours with small and medium load. Replace engine and chassis oil (clean engine and chassis and add clean engine oil).

C. After the use of the end of the run-in period, change the oil every 180 hours of cultivation.

D. Pay attention to the appearance of the machine during farming to keep the machine cool.

Second, when adding fuel precautions and fuel marking

A, plus 0 # diesel.

B. Add 70% of the fuel tank to avoid diesel spillage during farming.

C. When the fuel is added, the engine must be turned off first.

D. Cannot remove the diesel filter when adding fuel.

III. Precautions when adding lubricating oil and marking of lubricating oil

A. The engine and chassis parts must be combined with CD40 or CC40 diesel engine oil, and the chassis should not be added with gear oil.

B. When checking the amount of oil, the machine should be in a horizontal position.

C. When checking the oil quantity with the oil dipstick, do not rotate the oil dipstick. The oil position should be between the upper and lower scales of the oil dipstick and the maximum scale must not be exceeded.

IV. Precautions before starting the tiller

A, in a neutral position

B. Check if the engine oil and the chassis oil are enough.

C. Check if there is fuel.

D. Check if the bolts in each part are loose.

E, pay attention to the starting position, the feet should be away from the tool, the foot can not be in front of the tool, at the same time pay attention to the machine can not stand before people.

V. Precautions in the operation of tiller

A. People cannot stand before the machine is cultivated.

B. Never avoid clothes, objects, etc. near the rotary tiller when the machine is cultivated.

C. When the machine is working with large stones or other obstacles, it is necessary to grasp the clutch in advance so that the machine can bypass and then farm.

Sixth, the attention of the micro-plow surface transfer process

A. The engine must be turned off when transferring.

B. The engine must be turned off when transferring the ridges. Never allow people to pull the machine in front of the machine.

Seven, when using reverse gear precautions

A. Always use the throttle

B. When using unskilled, avoid using reverse gear.

C. When using reverse gear, pay attention to the position of the foot. Don't get too close to the tool. At the same time, press down the handle frame slightly.

D. Use reverse gear with caution when cultivating paddy fields.

VIII. Precautions when cleaning the winding on the tiller cutter

A. The engine must be turned off when cleaning the windings on the tiller cutter.

B. Do not clean directly by hand directly to clean up the windings on the tiller cutters. Use metal objects such as trowels to clean up.

Nine, how to properly clean maintenance disassembly air filter, oil filter device, diesel filter

A. The filter element and filter bowl of the air filter must be cleaned every class during the farming season. The amount of oil must be added in the air filter bowl.

B. The engine must clean the oil filter when changing the oil.

C. The diesel filter must be cleaned after 3 to 6 months of use.

Ten, how to correctly select the appropriate tool for different arable land

A, deep-cultivation boring tool: suitable for deep plowing, land reclamation, but easy to wrap grass.

B. High-efficiency paddy field wheel: Suitable for farming of various paddy fields, but no more than 45 cm.

C. Dryland Machete: Suitable for all kinds of dryland cultivation, but the soil moisture can not be too heavy.

D. Hexagonal roller knives: Suitable for cultivating fields with heavier moisture and more weeds.

XI. Maintenance method when the tiller is idle for a long time

A, let go of the diesel in the tank.

B. Clean up the windings on the machine.

C. Let go of the oil in the engine and the chassis and clean it. Add clean oil.

D, clean the appearance of the machine.

E. Pull the piston to top dead center.