Walking tractor driver can not shut the throttle in the seat, be sure to get out of the car with a hand-pull speed regulator to turn off. The reason for this phenomenon is that the throttle lever and the connecting plate assembly are improperly installed. It is not guaranteed that the throttle lever is in the top position when the throttle lever is in the minimum position; the throttle connecting piece (located in the timing gear housing cover) (bottom left) of the installation location is not proper, its small head up or left, resulting in insufficient pre-tightening force of the torsion spring, when the throttle handle is in the oil stop position, the connecting plate assembly does not have enough power to turn the speed control handle to the most The upper oil stop position shuts off the throttle. To install the throttle flap: First, insert one end of the torsion spring into the small hole of the connecting piece, and put the torsion spring and the connecting piece over the assembly. Then fasten the bolts through the assembly and pre-tighten the body. Then twist the torsion spring with your left hand, that is, apply a pre-tightening force to it so that the small end of the connecting piece is at the lower left position of about 15. Tighten the bolts last to fix the assembly.
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
Product features:
1.Ideal cold light effects.
Using the new LED cold light source, energy saving and environmental protection and long service life up to 80,000hours or more. Temperature increase over surgeon`s head < 1℃.
LED do not engender infrared ray and ultraviolet radiation, it doesn`t have the temperature rise and tissue damage caused by halogen shadowless light, can accelerate the wound healing after surgery, and has no Radiation pollution.
LED color temperature constant, soft, very close to the natural sun light.
2.Excellent shadowless effect
Lamp with the most scientific radian,Multi point light source design, so that more fullness of the light spot,When the lamps are partially occluded, also can achieve perfect shadowless effect.
Lamp panel radius of gyration: ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
3.Excellent deep lighting
4.Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
5.Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°, The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.
The equipped with fatigue correcting unit and fix position hand handle device, easy to fix position after long time use.
6.Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment, easily adjust, flexible fixed.
Mobile Type LED Operating Light Mobile Type LED Operating Light,Mobile Operating Light,Mobile LED Surgical Light,Movable LED Operating Lamp Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com
