Tractor rain flooded after cleaning and maintenance

On the coast of Zhejiang Province, where there is plenty of rain and typhoons, the tractors are prone to rain and flooding. If the locomotives are not cleaned and maintained in time, the mechanical performance and service life of the tractors will be seriously jeopardized. After the tractor is exposed to rain and flood, the following treatment is recommended:

1. Clean the soil and weeds on the tractor in time.

2. Remove the exhaust pipe and clean the dirty cement sand inside.

3. Clean the air filter. The filter element is first cleaned with diesel oil and then soaked with engine oil, and then assembled after the excess oil drips from the filter.

4, remove the cylinder head, remove the valve group, wash the soil, remove the rust after the grinding valve.

5. Remove the vortex chamber inserts, clean the impurities, and unblock the main spray holes and start holes that are blocked on the inserts.

6, remove the connecting rod nut, remove the piston rod group cleaning, remove the carbon on the piston with a copper scraper or bamboo sticks.

7. Drain the dirty oil in the fuel tank and clean the fuel tank, diesel filter, and fuel injection pump.

8. Release the cooling water and flush the impurities in the cooling water with water until the clean water flows out.

9. Release the oil in the oil pan and clean the oil pan and filter with diesel oil. After washing, add the oil mixture (2/3 oil, 1/3 diesel oil), shake the crankshaft for several revolutions, clean the lubrication oil tank, and then release the mixed oil. Add the clean oil to the specified scale position.

10. Remove the clutch and clean the parts with diesel. After washing, dry and install.

11. Discharge the gear oil in the transmission, wash it with diesel oil, and add clean gear oil.

12, clear the tire sand. Clean the dirt on the ball. Adjust the toe of the front wheel and the freewheel of the steering wheel.

13. Disassemble the brake, clean the mud of the brake hub and brake pad, dry it and then install it.

14. Clean the dirt inside the electrical equipment. The coils are dried for inspection of insulation and electrical conductivity. Remove dirt from the poles of the battery and apply butter on the line cards and poles. Unscrew the filling hole cover, clear the ventilation hole, clean the impurities in the battery with distilled water, wash and add electrolyte to charge.

Silicone Vibrator

Spice Novelties Co.,Limited ,