Seven points for agricultural machinery storage maintenance

First, anti-iron parts Rusty agricultural machinery Most parts are made of iron, if poorly managed, it is easy to shorten the service life due to rust, especially thin-walled iron production, such as machine wall, pump water pipe, etc. Rusty will be scrapped. Therefore, such iron parts should be cleaned when not in use, painted with anti-rust paint, and stored in a ventilated and dry place. Second, anti-rubber aging rubber parts dampened or stained with oil will be easy to aging cracks, reducing service life. Therefore, mechanical belts such as harvesters, tractors, and pumps should be removed from storage and stored in a dry and ventilated place. Third, the prevention of wooden parts rot Some agricultural machinery parts are made of wood, wood deformation and mildew after moisture. Therefore, when wooden pieces are stored, they should be washed, dried, coated with tung oil, and placed in a ventilated and dry place. Fourth, anti-spring deformation spring most play two roles, namely, the role of stretching and compression. If it is not in a free position during parking, the spring will lose its elasticity and cause plastic deformation and be scrapped in advance. For example, the intake and exhaust valves of the engine should be in a closed state to prevent the spring from being pressurized and prevent dust from entering the cylinder. Fifth, anti-motor damp agricultural machinery used as a power tool, the motor should be placed in a dry, ventilated, clean room when not in use for a long time. If the motor is placed together with pesticides, fertilizers, or on a damp muddy ground and where it is easily immersed in water, the motor will become damp after a long time and the internal insulation performance will deteriorate, causing short circuit, leakage, and even burning the coil. 6. Anti-engine cylinder corrosion The locomotive should be removed when the locomotive is not used for a long time, inject proper amount of oil into the cylinder, and then install the fuel injector, and then crank the crankshaft several times to make the piston reciprocate up and down in the cylinder. Second, the injected oil will be applied to the surface of the cylinder to prevent cylinder corrosion. 7. When large and medium-sized tractors with anti-battery vulcanization are parked for a long time, the batteries shall be dismantled, fully charged, and the outer surface shall be scrubbed cleanly. After Vaseline is painted on the surface of the electric piles and chains, they shall be placed in a clean and warm room, every other time. Monthly recharging is performed once.

Our Thermometer Products is good in quality and competitive in price. We are manufacturer and supplier Thermometer Products following your specific requirement. We are looking forward to your E-mail and establishing cooperative relationship with you! We would provide professional Thermometer with good services for you!

Digital Thermometer

Infrared Ear Thermometer, Flexible Digital Thermometer, Armpit Clinical Thermometer, Digital Thermometer for Baby

Ningbo Cland Medical Instruments Co., Ltd. , http://www.ruipumedical.com