Strength performance
Document.write('') ​​The strength of the document.write('') is the ability of the valve to withstand the pressure of the medium. Valves are mechanical products that withstand internal pressure and must therefore have sufficient strength and rigidity to ensure long-term use without cracking or deformation.
Sealing performance
Document.write('') ​​The sealing performance of the document.write('') is the ability of the valve to prevent media leakage. It is an important technical performance indicator for the valve. There are three sealing parts of the valve: the contact between the sealing surface of the opening and closing parts and the valve seat; the joint of the packing with the valve stem and the stuffing box; the connection between the valve body and the valve cover. The leak in the former place is called endoleak, which is commonly referred to as the lack of tightness, which will affect the ability of the valve to cut off the medium. For shut-off valves, internal leakage is not allowed. The latter two leaks are called leaks, that is, the medium leaks from the valve to the outside of the valve. External leakage can cause material loss, pollute the environment, and cause accidents in severe cases. For flammable, explosive, toxic or radioactive media, external leakage is not allowed, so the valve must have a reliable sealing performance.
Flow medium
The flow of material through the document.write('') valve.write('') will cause a pressure loss (both pressure difference before and after the valve), that is, the valve has a certain resistance to the flow of the medium, the medium is to overcome the resistance of the valve. It takes a certain amount of energy. In terms of energy conservation, when designing and manufacturing valves, it is necessary to reduce the resistance of the valve to the flowing medium as much as possible.
Opening and closing force and opening and closing torque
The opening and closing force and the opening and closing torque refer to the force or moment that the document.write('') valve document.write('') must be applied to open or close. When closing the valve, it is necessary to form a certain sealing pressure between the opening and closing parts and the sealing surface of the bearing seat, and at the same time overcome the between the valve stem and the packing, between the thread of the valve stem and the nut, and at the end of the valve stem and The friction of other friction parts must be applied with a certain closing force and closing torque. During the opening and closing process, the required opening and closing force and opening and closing torque are changed, and the large value of the Zui is in the closed moment. Or open the initial moment of zui. When designing and manufacturing valves, it is important to reduce their closing force and closing torque.
Opening and closing speed
The opening and closing speed is expressed by the time required to complete an open or close action with document.write('') valve document.write('') . Generally, there is no strict requirement for the opening and closing speed of the valve, but some working conditions have special requirements on the opening and closing speed. If some requirements are quickly opened or closed, in case of accidents, some requirements are required to be slowly closed to prevent water hammer, etc. This should be considered when selecting the valve type.
Motion sensitivity and reliability
This refers to the sensitivity of the document.write('') valve document.write('') to the corresponding changes in the media parameters. For valves with regulating functions such as throttle valves, pressure reducing valves, regulating valves, etc., as well as valves with special functions such as safety valves and traps, their functional sensitivity and reliability are important technical performance indicators.
Service life
It indicates the durability of the valve and is an important performance indicator for the document.write('') valve document.write('') and has great economic significance. Usually indicated by the number of opening and closing times that can guarantee the sealing requirements, it can also be expressed by the use time.
|