Technical principle of electrothermal constant temperature incubator

Electrothermal constant temperature incubator
The product is suitable for bacterial culture, fermentation and constant temperature testing in scientific research and industrial production departments such as medical and health, pharmaceutical industry, biochemistry and agricultural science.
Features:
1. The outer casing is made of high-quality cold-rolled steel plate and the surface is electrostatically sprayed.
2. The studio is formed by stainless steel plate or high-quality cold-rolled steel plate and treated with anti-corrosion treatment.
3. Optional pointer type temperature controller or microcomputer intelligent temperature controller. The intelligent temperature controller adopts PID control program, large screen digital display, light touch operation button, and has over temperature alarm function.
4. There is a double-layer tempered glass observation window in the middle of the door, which can directly observe the change of the culture.
5. The magnetic strip is sealed, easy to open and close, and well sealed.
Instructions for use:
1. When the test item is placed in the incubator, close the door and rotate the top flap on the top of the box.
2. Turn on the power and turn on the power switch.
3. Temperature setting: operate the setting button on the temperature controller plate, and set the required temperature according to the operation instructions on the temperature controller manual. Indicator light indication. The incubator is heated or at a constant temperature with a green light indicator.
4. When using, prevent the hard object from coming into contact with the sensor probe to avoid damage.
5. Detailed instructions for using the temperature controller Please read the instructions for using the temperature controller.
Edit this paragraph notes and maintenance repairs:
1. This box is not explosion-proof, so corrosive and flammable items are prohibited from being placed in the box.
2. Do not place the cabinet in a corrosive environment containing acid or alkali to avoid breaking the electronic components.
3. Pay attention to the protection of the cabinet paint surface to affect the appearance of the box.
4. When not in use for a long time, the power should be cut off. It is forbidden to enter the machine into the machine to avoid damage to the host.
5. The working voltage of this box is 220V AC, 50Hz. Before use, it must be noted that the power supply voltage used is consistent with the specified voltage, and the grounding pole of the power socket is effectively grounded as specified.
6. When using the power, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth and rinse with water.
7. The power cord should not be wrapped around metal objects. Do not place it in a place with high temperature or humidity to prevent the rubber from aging and causing leakage.
8. The test object should not be over-squeezed in the box, so that the air flow is smooth, the heat inside the box is kept even, and the bottom plate of the inner chamber is close to the electric heater, so it is not suitable to place the test object. In the laboratory, the wind top flap should be properly opened to facilitate adjustment of the temperature inside the box.
9. When the incubator is placed in valuable strains and cultures, it should be observed frequently, abnormal conditions occur, and the power supply should be cut off immediately to avoid unnecessary or unnecessary losses.
10. Do not open the temperature controller to prevent damage when it is not necessary.
11. After each use, the power must be cut off. Always keep the inside and outside of the box clean and the water in the tank clean.
12. When the temperature is high, care should be taken to avoid burns.
13. The fuse tube is installed in the left space of the box. When changing, the side door needs to be opened and the power must be cut off.
14. After the packaged incubator, under the condition of observing the rules of storage and use, the manufacturer shall replace or repair the parts for the user free of charge when the product fails to work normally from the date of delivery (one year of use).