The person in charge of the Ministry of Land and Resources revealed today that China will build 100 million mu of high-standard basic farmland this year. According to the regulations issued by the Ministry of Land and Resources on the "Standard for the Construction of High-standard Basic Farmland (for Trial Implementation)", after the completion of high-standard basic farmland, the quality assessment of cultivated land should be carried out according to the agricultural land classification and classification procedures.
The so-called high standard basic farmland is a certain period of time, through the formation of land consolidation and consolidation of the formation of the basic farmland, supporting facilities, high-yield and stable production, good ecology, strong disaster resistance, and modern agricultural production and management methods to adapt to the basic farmland. The construction of high-standard basic farmland is mainly to lay a solid foundation for national food security. According to the national land remediation plan, China will build 400 million mu of high-standard basic farmland in 2015, and strive to build 800 million mu of high-standard basic farmland by 2020.
According to the person in charge of the Ministry of Land and Resources, the key areas for the construction of high-standard basic farmland include basic farmland protection areas and basic farmland preparation areas, key areas for land consolidation and reclamation development identified in the overall land use plan, major projects, and land consolidation plans. Land consolidation key areas and major projects, basic farmland consolidation key counties. However, areas with terrain slopes of more than 25 degrees, nature reserves, returning farmland to forests, returning farmland to grassland, and rivers, lakes, reservoirs and other areas are prohibited.
1200*600mm Arrow Board
The installation method of the vehicle-mounted guide plate can be customized, and the most commonly used is the hoop installation.
Hoop installation:
The first type: If your car does not have a pillar, you can install the bracket bar as shown in the picture on the left, and fix the guide plate on the bracket bar with a screw. Fix the guide plate on the bracket bar with a screw. (First put the screw into the guide brand aluminum slot, then pass the screw through the hole of the bracket bar, put the shrapnel, washer, nut, and then tighten the nut).
The second type: install three L-shaped brackets at suitable positions on the roof, install three aluminum bars on the three L-shaped brackets respectively, punch holes in the aluminum bars that are aligned with the L-shaped brackets, and then fix the aluminum bars on the On the L-shaped bracket (first pass the screw through the holes on the aluminum bar and the L-shaped bracket, insert the shrapnel, washer, and nut, and then tighten the nut).
The third type: install two aluminum strips directly on the roof of the car, punch two holes in the appropriate position of the aluminum strip to facilitate the installation of the aluminum strip on the car, fix the aluminum strip with screws, and then fix the guide plate with a hoop On the aluminum bar. Pass the end of the screw with a nut through the aluminum slot on the back of the guide plate, and then align the hoop around the aluminum bar with the screws on the aluminum slot, that is, put the holes at both ends of the hoop into the two sides of the aluminum bar. On the screw, screw on the shrapnel, washer, and nut, and then tighten it.
Arrow Board,Road Work Arrow Board,Led Arrow Board Truck Mount,Led Traffic Arrow Board
Shenzhen Wide Way Optoelectronics Co., Ltd. , https://www.wdmtrafficlight.com