Selection of cuttings: From late February to mid-March, choose a mother tree that is more than 10 years old and grows well. In the middle and upper part of the crown, cut 2 to 3 years old, 4 to 6 cm in diameter, free from pests and diseases, and no damage. Thick branches, trimming off lateral branches and leaves, cut into 1.8 to 2 meters long cuttings. The top of the cutting bar is flattened and wrapped in yellow mud slurry and then wrapped in a thin film; the lower part is soaked with ABT rooting powder at a concentration of 50 mg/L for about 2 hours, and slightly aired until the alcohol in the liquid solution is volatilized and then cut. Cutting: The treated cuttings are planted in the bottom of the pit in a timely manner. The spacing of the cuttings is generally 20 centimeters and 20 centimeters. The base of the cuttings is 30 to 40 centimeters in diameter, and the branches are exposed to 1.5 meters in the soil surface. Immediately after the cutting is completed, pour enough water into the roots and pour the water into the bed. Make sure that the base of the cuttings is in close contact with the soil so that the incision absorbs the moisture in the soil. When the seedbed soil temperature reached above 16°C, the cuttings began to take root.
Ball Mill
MeCan Ball Mill can be used for the Gold Production Line,Rare Earth Production Line, Cement Production Line, Iron Production Line, etc, and it is can be customized.
Ball Mill,Ceramic Ball Mill,Ceramic Ball Grinder,Ceramic Grinder Mill
Guangzhou MeCan Medical Limited , https://www.medical-waste-incinerator.com