JRT usb interface distance sensor board adds a USB port to a Laser Distance Sensor, inexpensive laser distance measurement sensors, allowing customers directly using GBeacon-2.3-Fx.exe software to control the rangefinder sensor. Usb laser distance sensors are the the most popular model devices, it works by measuring the phase of an visible-red laser beam that reflects on the target. Usually, customers would like to choose CH341SER.EXE version to test. USB Laser Distance Sensor,Distance Sensor,Laser Distance Sensor,Distance Measurement Sensors Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancesensor.com
Take a cylinder, put clean water in about 8 minutes, and put the jujube in a bamboo basket. The capacity is 60% of the bamboo basket. Then put the pot in the tank, gently stir and float the floating impurities, and use the core. The characteristic of the shell is so important that it sinks naturally and will be picked out. The upper layer of the jujube kernel will be cleaned and placed separately. The remaining jujube kernels are repeatedly processed 3 to 4 times according to the above method, until the loquat bottom is basically a core shell. The above-mentioned Suanzaoren and core shells are respectively dried or dried at low temperature, and the drug platform is selected to collect the Zao Ren, and the Zao Ren is used for standby or frying.