The following are four situations and solutions for the agricultural vehicle self-shifting: 1. Shaking and damage of the bearings in the gearbox or the loosening of the nut on the shaft end causes axial turbulence in the bearing during operation, resulting in a disengagement. Bearings and related spare parts should be replaced and fastening nuts at the shaft end of the transmission should be tightened. Second, the gear shift fork at the lower part of the shift lever is not properly adjusted due to wear or deformation of the operating mechanism, resulting in a decrease in the stroke of the fork shaft during shifting, and the transmission gear is in a half-engagement state, resulting in a disengagement. Should adjust the shift lever and levers and other operating mechanisms to make the fork stroke meet the requirements. If the gear head or fork is worn badly, replace it with a new one. Third, lock spring elasticity is reduced or broken, the fork shaft positioning groove or steel ball wear can cause the locking mechanism to malfunction, resulting in a disengagement. Should check the lock spring, fork shaft, positioning ball and other accessories, if necessary, be replaced. Fourth, the gear face wears heavily into a wedge shape, generates axial thrust during operation, as well as self-separation. In this case, the gear should be replaced. In order to ensure the normal operation of agricultural vehicles, agricultural machinery must understand the above four points in order to prepare for the occasion.
Air Sterilizer
Ningbo DOKEE Medical Technology Co., Ltd. , https://www.dokeemedical.com