First, the operation of the ploughing machine is not allowed to put the blade into the soil or into the soil before starting;
Second, when you are working, you are not allowed to make sharp turns and you are not allowed to go backwards. When turning or reversing, the tiller should be raised first. If the ground is raised and lowered, the speed must be slowed down and the lift is not allowed to be too high. The direction of the knuckle transmission must not exceed 30 degrees.
The third is to remove the grass, debris or fastening on the tiller and replace the pear knife. The power of the tiller must be cut off first after the engine is turned off.
Fourth, when the walking tractor turns in the ground, it should first lift the handrail, and after the tiller is unearthed, the steering clutch is separated.
Fifth, the power must be cut off when the field is transferred or over, and the tiller is raised to the highest position. When crossing the field, the driver should have a strong control of the tiller. (Nanfu)
Tags: Cultivator Operation