Impact Drill Impact Drill,Impact Cordless Drill,Electric Impact Drill,Corded Impact Drill ZHE JIANG ULITE TOOLS MANUFACTURE CO.,LTD , http://www.ulitepowertool.com
Measuring range
0-300mmHg/0-40.0kPa
Measuring accuracy
±0.4kPa/±3mmHg
Min. scale
0.1kPa/1mmHg
Memory
60 group memories
Auto shut-off (30sec after idle)
Â
Battery
AAA x 2, alkaline batteries
Battery life
approx. 2 months (at 3min per day)
Size
65 x 78 x 28mm
N.W.
128g (including battery)
OEM Services:
1) Customer can change the color of the Wrist Digital Blood Pressure(BP) Monitor
2) Private color box and instruction are available
Â
Description:
Measuring range
0-300mmHg/0-40.0kPa
Measuring accuracy
±0.4kPa/±3mmHg
Min. scale
0.1kPa/1mmHg
Memory
60 group memories
Auto shut-off (30sec after idle)
Â
Battery
AAA x 2, alkaline batteries
Battery life
approx. 2 months (at 3min per day)
Size
65 x 78 x 28mm
N.W.
128g (including battery)
OEM Services:
1) Customer can change the color of the Wrist Digital Blood Pressure(BP) Monitor
2) Private color box and instruction are available
Â
Model NO.: MN-MW-300A
Memory: 60 Group Memories
Size: 65 X 78 X 28mm
N.W: 128g (Including Battery)
Min. Scale: 0.1kpa/1mmhg
Trademark: MANEY
Transport Package: Standard Export Package
Specification: CE ISO9001
Origin: Zhejiang, China
HS Code: 9018199000
Model NO.: MN-MW-300A
Memory: 60 Group Memories
Size: 65 X 78 X 28mm
N.W: 128g (Including Battery)
Min. Scale: 0.1kpa/1mmhg
Trademark: MANEY
Transport Package: Standard Export Package
Specification: CE ISO9001
Origin: Zhejiang, China
HS Code: 9018199000
Description:
ULITE Impact Drill have high power. 500W, 530W ,800W. Long longevity motor using. Quiet and smooth gear voice. Little sparkling. Variable speed and reversing switch. Bearing is C & U certificated in china. Using longevity is long. Worker using is high efficiency. Drill chuck is 13mm.
Safety
1. Be sure to carry out strictly the relevant rules or obey the explanation first.
2. The workpiece to be drilled must be paied more attention regulary when it is drilled.
3. Use the plug correctly. Don`t change the plug and wire separately. And don`t access to power if the plug wire is broken. Take off the plug in time when the electric drill isn`t used.
4. Don`t extend the length of the power wire, and keep the power wire away from the heat source and oil.
Operation
1. Pls use machine under accurate voltage.
2. Keep the tool in non-loading for one minute. Check the transmission position is flexible and make sure there is no abnormal. Check the inverting switch is normal.
3. The head of the drill is sharp, Pls don`t touch is when you are drilling. If the rotation speed is reduced abnormally or stop suddenly or get stuck. Please turn off the power immediately.
4. Carbon brush should be checked periodically and replaced in time. If the carbon brush is finished, the carbon brush end would contact with commutator. The motor would be burnt.
5. When it is in following conditions, Pls don`t be used and send to repair immediately.
a. The insulation is damaged.
b. The power wire or electric cable case is broken.
c. The plug and wire is broken.
d. The sparkle appears seriously
6. The tools must be grounded and avoid to be shocked.