Artificial hatching pigeons have a new method

First, temperature. Incubate the birds in a thin water thermostat incubator without raising the room temperature. When the natural temperature of the environment is above 15°C, the optimum temperature (temperature of eggs) ranges from 38-38.6°C; when the natural temperature of the environment is lower than 15°C, the optimal temperature range is between 38.3-39°C. . The temperature of the hatching pigeon Schweppen was 0.2-1.4°C higher than that of the hatchery with the electric hatchery, and 0.5°C lower than the maximum temperature of 39.5°C of the chicken hatched with the hatchery. Pigeons hatched with the above temperature range have a bright coat and a high rate of breeders. The survival rate of artificial nursing is also high.

Second, humidity. Manually hatching pigeon eggs with a hatching bird thin water temperature box, the appropriate humidity is about 10% lower than that of the electric hatchling chicken, and the humidity is lower by about 15% than that of the hatched bird thin water thermostat hatched chicken, that is, in the box during the incubation process. There is no need to put water trays, and it is not necessary to spray water to increase the humidity before the shell is put out.

Third, turn the egg. In order to heat the pigeon eggs evenly, the eggs must be turned manually or naturally. From the second day of incubation, the eggs are usually turned once every 8 hours and the angle of turning eggs is 180. After 14 days, turning the eggs can be stopped.

Fourth, the egg. After 12 days of breeder egg hatching, the embryo develops progressively and the physiological heat energy is high. Eggs should be sent out of the box to be dried, and the new hatched eggs in the box should be hatched (without hanging eggs). After 15 days of incubation, pigeon eggs should be crushed between the two egg tempera- tures, in addition to the adjustment of egg cores. Eggs should be kept at a flexible time. When the egg temperature drops to 35°C, the eggs are dropped into the box. It is better to continue hatching. This method can overcome the constant temperature incubation must be a constant temperature brooding problems, hatched pigeons with baskets, cartons from the temperature brooding, the survival rate is also high.

Fifth, according to the egg. Follow the egg three times. The first time it takes place at 5-6 days of incubation, the second time it takes place at about 11 days, and the third time it is usually done during egg transfer. Eggs, dead embryos, and shelled eggs are instantly removed by egg, and abnormal embryos are immediately removed to maintain good embryonic development.

Sixth, 捡 young. Embryos and shells hatch in groups, the indoor light is dark, under the premise of maintaining the fresh air of the young bird, once every 3-4 hours, once to avoid the disturbed and strong light caused by the development of embryos The pigeons hatched in advance to increase the proportion of bellies, especially after 60-70% of hatching, to prevent low temperatures, so as not to suffocate nestling pigeons in the shell. At this point, note that by adding water to the incubator and keeping the egg temperature below 38.5°C, the hatching rate and the rate of hatching will be greatly improved.

HTS1800 Sintering Furnace has function of power-off memory, it can restart with arbitrary curve of any program. HTS 1800 adopt world-class quality hearth material, new toroidal type transformer, silicon molybdenum rod, PID intelligent temperature control and high performance motor and belt, all those excellent components endow HTS1800 with great stability and longer lifespan.

Sintering Furnace

Vacuum Sintering,Zirconia Sintering,Zirconia Sintering Furnace,Vacuum Sintering Furnace

Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com