9 Tips for Emergency Car Repair to Ensure Worry-free Driving

The nine secrets of emergency repairs ensure that you can drive without worry. If you accidentally start driving, you will suddenly get sick. Cars are stranded on highways and will certainly deter your travel. However, if you have mastered the secrets of the following nine emergency repairs, you can ensure maximum worry-free driving. A. The tubing is broken. When the tubing breaks, it can find a rubber or plastic tube that fits the diameter of the tubing. If the socket is not tight enough, tie the wires tightly at both ends to prevent oil leakage. B. The tubing ruptured. When the tubing ruptures, the cracked area can be wiped clean, coated with soap, wrapped with a piece of cloth or tape around the broken tubing, and tied with wire, then coated with soap. C. Oil pipe joint leakage. The cotton yarn can be used to wrap around the lower edge of the horn and tighten the tubing nut and tubing connector. The bubble gum or maltose can also be chewed into a paste, coated on the tubing nut seat and allowed to dry to seal. D, leakage of oil leaks. According to the size of the trachoma, use the electric fuse of the corresponding specification, and gently poke it into the trachoma with a hand hammer to eliminate oil leakage and water leakage. E. Damage to the fuel tank. When the motor vehicle is in use, it is found that the oil leakage from the fuel tank can be wiped clean, with soap or bubble gum applied to the oil spill, temporarily blocked; with epoxy resin adhesive repair, better. F, the sedimentation cup breaks. Use a tape pipe or plastic tube to put the sediment cup into and out of the tubing sleeve so that the oil does not pass through the settling cup. G. The inlet and outlet hoses are broken. When the rupture is not great, use a cloth coated with a layer of soap to wrap the leak. If the crack is large, cut the broken part of the hose, put a bamboo tube or iron tube in the middle, and fasten it with wire. H. The valve spring breaks. The broken spring can be removed and the broken two sections can be installed in reverse and ready for use. If the spring breaks into several sections, the intake and exhaust valve adjustment screws of the cylinder can be removed to keep the valve closed and the cylinder to stop working. I. The fan belt breaks. The broken belt can be tied in series with a wire or the car can be driven off with a stop-and-go method.

Food bowl

Opal Glass Pot,Bowl,Opal Ware Bowl

Harvit Ceramic Co., Ltd. , http://www.czhvceramics.com